Error/Display Messages - Jacuzzi J - 415 Owner's Manual

J-400
WARNING:
!
which contains mercury. Dispose of the lamp in accordance
with disposal laws. See www.lamprecycle.org.
22. Once power is activated you can check the ballast
(12), Figure 7, to see if the CLEARRAY System is
functioning. A solid green light indicates that the
CLEARRAY System is being provided power and
should always be on. A solid red light indicates that
UV lamp is activated.

17.0 Error/Display Messages

There are a number of unique functions designed into
your Jacuzzi spa to protect it from damage and/or to
aid in troubleshooting. When an error occurs the spa will notify you by
showing the screen below and an error code next to it. Also the indicator
light located on the front cabinet panel of the spa is an early detection
system that will notify you when the spa needs immediate attention.
A solid white light indicates that all operations are normal. A solid red
light indicates that immediate attention is required to clear or fix an error
code. Following is a listing of all the possible messages along with their
meanings. Always insist on genuine Jacuzzi replacement parts.
Error
Overheat Protection
Water is below set-temp
Communication Error
Pump does not operate
Freeze Protection
Emergency Shutdown
Open Sensor
Shorted Sensor
Open Sensor (Hi-Limit)
Page 92
This CLEARRAY System includes a UV lamp,
Logo
Light
Red Shorted Sensor (Hi-Limit)
White Start-up Malfunction
Red
Red Closed Flow Switch
White Audio Comm. Malfunction
Red Blinking Heater Icon
Red Extended Temp Activated
Red Please Check Filter
Red Feature Not Installed
4:05 PM
98
"Displays
!
Error
Message"
Error
Open Flow Switch
T emp.
F
Indicator
Lights
Figure 7
Logo
Light
Red
Red
Red
Red
White
White
White
White
White