Jacuzzi J - 415 Owner's Manual page 86

J-400
filter by rotating it counterclockwise. For cleaning procedures see
step 6 below. Once the filter has been cleaned or replaced, reinstall
it into the skimmer below the polishing bag. Replace bag, then install
filter lid by rotating it clockwise until you feel it latch in place. DO
NOT FORCE LID! FINGER TIGHT ONLY!
4. Remove the ProClear skimmer assembly (A) by gently lifting upward
from the filter bucket.
5. Remove the ProClarity™ filter cartridge by rotating it
counterclockwise to unthread it, then remove the filter pin and
disconnect the filter from the filter canister.
6. Clean the ProClarity™/ProClear filter cartridges and filter canister
with a garden hose and high pressure nozzle. Rinse debris from the
filter pleats beginning at the top and working your way downward.
Continue, one section at a time until you have cleaned all debris from
the filter pleats. Replacement filter cartridges may be purchased from
your authorized Jacuzzi dealer.
C. For the J415, J425, and J495:
DANGER:
A
risk oF Death, Drowning, or entraPMent, never
OPERATE SPA WHEN FILTER IS NOT PROPERLY INSTALLED
or iF skiMMer asseMbly is DaMageD or altereD!
b
(Spa
Shell)
Lift the cover upward to
access filter cartridges.
Page 80
TURN POWER TO SPA OFF! TO DECREASE
C
Debris
Bag
Remove the ProClarity
debris bag from clips
and then clean out
debris.
D
(Spa Shell)
Rotate each filter
cartridge handle
counterclockwise to
unthread from mating
wall fitting.