Daewoo D-CV701PC Series Service Manual page 50

Follow the installation instructions to install the washer more conveniently.
14. Test Operation
- Run a test operation to identify any
malfunctions or leaks.
Wall Type
Concrete
Tile
Grounding is required to prevent electric shocks. Check the availability of circuit breaker.
- Contact the sales store or service center for further details.
If the power outlet has no grounding terminal:
- Grounding must apply for the safe use of washer.
- Grounding is performed by the service center engineers or qualified personnel only.
- Contact your nearby service center for details.
Grounding is prohibited in the following locations.
- Gas pipe (It has the risk of explosion or fire)
- Phone wire or lightning rod (It is risky when struck by lightning)
- Water pipe (Many water pipes are made of plastic materials)
Exchange of Power Cord
Relocation
15. Organize inlet and drain hoses and power cord
- Organize inlet and drain hoses and power
cord with molding and hose guide.
* Wipe the attachment area clean with a dry cloth
and then attach the molding and hose guides
tightly.
Depth of Hole Bit diameter of hammer drill
45mm
Distance between tile and
retaining wall + 45mm
If a power cord is broken, you should contact the sales
store or service center as a special tool is required.
Contact the service center to relocate the installation.
(Additional charge applies)
49 49
16. Mount the body
- Connect 4 nuts and bolts above and below
after mounting the body.
* Check whether any cleavages exist on both
sides.
Bit diameter of tile hole
ø 13mm
ø 14mm
-