DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 2 SAFETY INSTRUCTIONS & SPECIFICATIONS SAFETY INSTRUCTIONS Your safety is important to us. Read all instructions before using your washer. Do not wash items cleaned, washed, soaked in, or spotted with wax, paint, gasoline, oil, or other flammable fluids.
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 3 PARTS DESCRIPTIONS DETERGENT CASE WATER CONNECTOR (Symbol (Blue Color : Cold, Pink Color : Hot) DOOR FABRIC SOFTNER INLET (Symbol, See page 10) LIQUID BLEACH INLET (Symbol See page 10) LINT FILTER...
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 4 DIRECTIONS FOR SAFE USE HOW TO INSTALL Location If washer is not level, it should be corrected by Place your washer on a level and solid floor, the adjustable leg (provided optionally) in the...
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 5 Power Supply • Before plugging the plug into wall receptacle, check the voltage rating is in the range of rating, marked on the label at the back side of your washer. SCREW...
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 6 WATER CONNECTION Be careful not to confuse hot water inlet (pink color) and cold water inlet (blue color), if your washer is provided with dual water inlets. Also if you have only one water tap, connect the inlet hose with cold water inlet (blue color).
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 7 DRAIN HOSE SETTING Before operating your washer, install drain hose properly. First, connect the drain hose to the drain outlet at the rear side of your washer, and then fasten it tightly with the hose clamp.
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 8 HOSE TO OPERATE PREPARATION FOR WASHING To obtain the best washing results, you must operate your washer properly. This section give you this important information. Preparing clothes for washing • Close zippers, snaps, and hooks to avoid •...
DWF-800MP(¿ ) 01.3.26 9:57 PM ˘ ` 9 DESCRIPTIONS OF CONTROL PANEL DWF-800MP Power Switch • Press this button to turn the power ON or OFF. Temperature Selector (Optional) • If your washer is connected to two water taps for cold water and hot water, you can select them.
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 10 GENERAL PROCEDURES FOR OPERATION 1. Add measured detergent to the washer, (Follow manufacture’s directions for safe use) 2. OPTIONAL STEP If desired, add measured liquid chlorine bleach to the bleach inlet. use only liquid chlorine in the bleach inlet •...
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 11 GUIDES FOR BASIC WASHING PROGRAMS Fuzzy Course • This course is a washing method for the general clothes except the extraordinary clothes such as blanket, wool, etc. 1 Put in the clothes.
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 12 Speedy Program • This course is effective for the washing of light clothes or lightly stained clothes. • Regulate the water level according to the wash load. 1 Press the power 2 Press the course...
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 13 GUIDES FOR OTHER USEFUL PROGRAMS Partial process & combination WASH TIME CONTROL • As the control button is pressed, wash time will be repeated as following; 9 min • If you don’t want wash process, you must adjust wash time to 8 min..
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 14 PERIODIC MAINTENANCE Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Cleaning your washer Exterior Interior Wipe up detergent, bleach, and other spills...
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 15 Cleaning the Lint Filter 1 Pull the Filter frame up 2 Turn the lint filter inside out, 3 Return the filter as it was, ward. wash to the lint off with and insert the filter frame water.
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 16 SPECIAL GUIDES FOR REMOVING STAINS Stained, heavily-soiled, or greasy items, may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen soil before washing.
DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 17 TROUBLE SHOOTING GUIDES Most problems are easily solved if you understand the cause. Check the following list for problem before calling for service. Before calling for service, check these PROBLEM CHECK POINT •...