Daewoo D-CV701PC Series Service Manual page 49

9. Organize hoses
- Place hoses in the hole.
* Prevent the hoses from
becoming jammed
between the wall and
washer.
12. Fix the washing machine
- Connect the fixing nut (1EA) after inserting the
flat washer (1EA) and spring washer (1EA)
and then connecting a regular nut (1EA).
- Fasten the nut with ø14 spanner.
* Excessive fastening of nut may destroy the
product or wall tile.
* Fixing nut must be fastened tight.
1 Lock the water supply valve
2 Disassemble the water supply valve
3 Install the branching adapter
(Install adapters respectively on cold
and hot water taps)
4 Branch off the inlet hose
13-3 Install the inlet hose - Underground water pipe, obsolete pipe
1 Install the nozzle AS (skip at the obsolete pipe)
2 Install the branching adapter
3 Connect the inlet hose
* Examine whether a water leak occurs after instillation.
10. Inject chemical anchor and insert cushion pads
- Inject chemical anchor into the fixed set anchors.
- Insert cushion pads on the fixed anchors.
- Attach pads to the wall.
13-1. Install the inlet hose - Regular faucet
1 Lock the water supply valve
3 Install the branching adapter
* Wrap the connection of branching adapter and water supply valve with Teflon tape.
* Examine whether a water leak occurs after instillation.
13-2 Install the inlet hose - Kitchen sink, shower
1 Install union connector
2 Install filter inlet
3 Branch off the inlet hose
* Install Install fiter inlet near the water supply valve
* Examine whether a water leak occurs after instillation.
48 48
11. Install the washing machine
- Install the washer on the surface of wall so as
not to create a large gap.
2 Disassemble the water supply valve
4 Branch off the inlet hose
hot
Hot Cold
water
water
water
For cold water
<Additional Parts>
13-4. Install Water filter inlet (option)