Folding Handle Set-Up Instructions; Installing The (Optional) Seat - BLADEZ PB-SM804SA Product Handbook

Folding Handle Set-Up Instructions

To unfold the Power Board, begin by pressing down on the FOLDING HANDLE with
one hand (Fig. 3), while gently pulling up on the handlebars with the other (Fig. 4).
Fully extend the handlebars to their upright position until you feel
the mechanism lock into place (Fig. 5).
When you first take the Power Board out of the box, the BRAKE
LEVER and ACCELERATOR LEVER will be in the down
position for shipping. Using the provided Allen Wrench, loosen
the tension bolt, and adjust the levers to a comfortable position
(Fig. 6). Then tighten the bolt.
* BE CAREFUL NOT TO DISCONNECT THE CABLES!
You are now ready to ride your Power Board!

Installing the (Optional) Seat:

Your Power Board may have come with an optional Seat Attachment.
Insert the Base Post firmly into the Base Bracket. Make sure the tube
guides slide into the base grooves.
Slide the Seat Pin through Base Bracket to secure the Base Post (Fig. 7).
Slide the Seat Clamp over the Base Post.
Slide the Seat Post into the Base Post and align into the position (Fig. 8).
Adjust to desired height.
Tighten and close the Seat Clamp.
Page 10