BLADEZ XTR-HD Product Handbook

Electric power board

Advertisement

Powered Personal Transportation
Electric Power Board
Product Handbook
FOR THE BLADEZ XTR-HD
ELECTRIC POWER BOARD
Model: PB-SM809
PLEASE BE SAFE WHEN RIDING . . .
ALWAYS WEAR A HELMET AND OBEY ALL LAWS!
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for BLADEZ XTR-HD

  • Page 1 Powered Personal Transportation Electric Power Board Product Handbook FOR THE BLADEZ XTR-HD ELECTRIC POWER BOARD Model: PB-SM809 PLEASE BE SAFE WHEN RIDING . . . ALWAYS WEAR A HELMET AND OBEY ALL LAWS! Page 1...
  • Page 2 Page 2...
  • Page 3: Battery Maintenance And

    DO NOT JUMP or ABUSE THIS PRODUCT! DO NOT RIDE IN WET CONDITIONS! Failure to follow these instruction and abuse will VOID YOUR WARRANTY! If you have any questions, please contact Bladez customer service (866) 325-2339 or visit us on the web at www.ebladez.com Page 3...
  • Page 4 IMPORTANT PLEASE READ THIS BEFORE USING THIS PRODUCT READ THIS FIRST! WARNING This product does not conform to Federal Motor Vehicle Standards and is not intended for operation on public streets, roads or highways. Serious injury can result from the unsafe operations of this product. Operator can minimize these risks by using certain safety equipment such as: safety helmet, goggles, gloves, elbow and kneepads and appropriate footwear.
  • Page 5 ASSISTANCE, PLEASE CALL BLADEZ, TOLL FREE AT: (866) EBLADEZ (866) 325-2339 MONDAY thru FRIDAY, 8am to 5pm PST or visit us on the web at: www.ebladez.com NETWORK OF BLADEZ AND TANAKA SERVICING DEALERS FOR ALL YOUR POWERBOARD NEEDS Page 5...
  • Page 6: Table Of Contents

    TABLE OF CONTENTS BATTERY MAINTENANCE AND ................... 3 CHARGING INSTRUCTIONS:..................3 GETTING TO KNOW YOUR BLADEZ POWER BOARD..........7 GETTING STARTED ...................... 8 Install Handle Bar & Unfolding Charging Install Seat & Install Basket Riding FOLDING AND STORAGE................... 11 CHARGING SYSTEM ....................12 RECOMMENDED TOOLS ....................
  • Page 7: Getting To Know Your Bladez Power Board

    GETTING TO KNOW YOUR BLADEZ POWER BOARD Before operating your BLADEZ Power Board, please get acquainted with all of the features: 1. Accelerator Lever (Variable Speed) 12. Seat Clamp 2. Brake Lever 13. Seat Pin 3. Folding Handle 14. Seat 4.
  • Page 8: Getting Started

    GETTING STARTED Install handle bar Fig. 1 Before using your XTR-HD, loosen the 4 bolts from the Stem Billet Aluminum Stem with the Allen Wrench provided, and then remove the stem from the cap as shown in Fig 1. Place handle bar onto the Billet cap with the hole facing Fig.
  • Page 9: Charging

    Charging Your XTR-HD should come charged out of the box. Bladez still recommends charging the unit for 6-8 hours prior to first use! Bladez also recommends charging your XTR-HD after every use and prior to storage. Warning: DO NOT allow your Powerboard to go into deep discharge! – This will damage the batteries.
  • Page 10: Install Seat & Install Basket

    Install Seat Fig. 9 Your XTR-HD comes with Seat Attachment. Additional seat option is available for purchase directly from www.ebladez.com. 1. Pull out the lock pin from the Base Stem as shown in Fig 9. 2. Insert the seat onto the Base Post, adjust seat position and tighten and close seat clamp with a 14mm wrench as shown in Fig 10.
  • Page 11: Riding

    FOLDING AND STORAGE When you are done riding the XTR-HD you can fold it down for compact storage, carrying and transportation. Make sure the POWER SWITCH is in the OFF position and the charger is unplugged from the socket.
  • Page 12: Charging System

    Oil, Grease or Lubricant (such as WD-40) BRAKING SYSTEM The XTR-HD uses a front wheel disc/calliper system activated by a hand lever (on the left side of the handlebar). The brake is activated by squeezing the BRAKE LEVER with your left hand. The XTR-HD is equipped with a controller that temporarily disengages the power to the motor when the BRAKE LEVER is depressed.
  • Page 13: Squeaky Brakes

    TIRES AND WHEELS The Bladez XTR-HD uses an identical rim and tires assembly on the front and rear wheels, which means that the tires can be rotated. The wheels are actually two wheel halves (split rim) bolted together to make it easier to remove and replace the tire.
  • Page 14: Chain Care

    Chain Adjustment The chain on the XTR-HD should be adjusted from time to time. The chain should be tight enough not to skip, but have a little bit of play. If you feel your chain skipping or make a popping noise, adjust the tension immediately.
  • Page 15: Troubleshooting Guide

    If you have any additional questions, please contact Bladez Customer Service Department at (866) 325-2339 x 1 Thank you for purchasing a Bladez Power Board and please tell your friends about how much fun you had on the Bladez Power Board.
  • Page 16 Bladez, Corp. 20155 Ellipse Foothill Ranch, CA 92610 Page 16...

This manual is also suitable for:

Xtr-hd pb-sm809

Table of Contents