Master Clear; Learning; Clear All Stored Learned Commands Under A Mode - RCA RCU1010 User Manual

Clear All Stored Learned Commands Under a Mode (continued)
4. Press and release the desired component key for the Learned
commands you want the RCU1010 to clear (TV, VCR, SAT,
AUX, etc.).
Only the components that have Learned commands are
Note:
shown on the LCD touchscreen.
5. The Confirm to Delete? Screen is displayed. Press and release
the OK key on the LCD touchscreen. The display shows the
Deleting Wait Screen. If there are no other component modes
with Learned commands, the Learn IR Mode? Screen appears.
If there are other component modes with Learned commands,
the Delete IR Mode? Screen is displayed.
6. All Learned commands that were previously programmed
under that mode are now cleared. To exit the Setup Mode,
press and release the LCD EXIT key, followed by the LCD OK
key on the Exit Setup Screen.

Master Clear

Clearing all stored Learned commands is recommended before first-time Learning.
To clear all Learned commands, follow these steps:
If no commands have been learned, this option is not
Note:
shown in the Setup Mode.
1. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and the
touchscreen shows the Code Setup Mode? Screen.
2. Release the SETUP key.
3. Press and release the SETUP key repeatedly until the Delete
IR All? Screen appears.
4. Press and release the LCD OK key.
If, at this point, you wish to abort the Master Clear
Note:
operation, press and release the LCD EXIT key.
5. The Confirm to Delete? Screen is displayed. Press and release
the LCD OK key. The LCD touchscreen displays the Deleting
Wait Screen, followed by the Learn IR Mode? Screen.
6. All Learned commands are now cleared for all
component modes.
7. To exit the Setup Mode, press and release the LCD EXIT key,
followed by the LCD OK key on the Exit Setup Screen.
16