Download Print this page
RCA RCU1010RF Quick Start Manual
RCA RCU1010RF Quick Start Manual

RCA RCU1010RF Quick Start Manual

Universal learning remote with touchscreen
Hide thumbs Also See for RCU1010RF:

Advertisement

RCU1010_US_QS_revA
3/19/03
16:41
Page 1
Universal Learning Remote with
TOUCHSCREEN
Quick Start Guide
Congratulations on your purchase of the RCU1010 Universal Learning Remote with Touchscreen. Your
RCU1010 controls up to nine components, including the most popular brands of TV, VCR, DVD, PVR,
SAT/CBL, CD and AUDIO equipment. This unit has the ability to learn commands from your existing
remotes, and the Smart Macro feature allows multiple commands to be executed in sequence with a
single keypress. The RCU1010 is easy to use, easy to program and gives you total control—at the touch
of your fingertips!
Getting Started
Before You Begin
This handy Quick Start Guide provides step-by-step instructions regarding some of the most popular
features of this remote control. Use it as a supplement to the User's Guide, to which you may refer
for further details.
The RCU1010 LCD touchscreen remains blank when the remote is not in use. The touchscreen turns
on automatically when you press and release the SETUP key, the BACKLIGHT key, or any LCD
touchscreen key. The remaining rubber keys do not activate the LCD touchscreen.
For the purposes of this guide, "component" refers to your electronic equipment—TV, VCR, DVD,
satellite receiver, auxiliary or audio components—all of which can be operated using the RCU1010 remote
control unit. When you press and release a component key, you put the remote in that component mode
(e.g., pressing the TV key puts the remote in the TV Mode). The remote remains in that mode until you
press and release another mode key. When you put the remote in a specific component mode, the control
screen that is shown on the touchscreen is the control screen for that mode.
Touchscreen keys
SETUP key
BACKLIGHT key
Install the Batteries
Your RCU1010 Universal Learning Remote with Touchscreen requires four AAA alkaline batteries
(sold separately).
1. Push on the tab on the back of the remote and slide the
cover down.
2. Insert the batteries, matching the batteries to the (+) and
(-) marks inside the battery case.
3. Slide the battery cover back into place.
RCU1010

Advertisement

loading

Summary of Contents for RCA RCU1010RF

  • Page 1 Before You Begin This handy Quick Start Guide provides step-by-step instructions regarding some of the most popular features of this remote control. Use it as a supplement to the User’s Guide, to which you may refer for further details. The RCU1010 LCD touchscreen remains blank when the remote is not in use. The touchscreen turns on automatically when you press and release the SETUP key, the BACKLIGHT key, or any LCD touchscreen key.
  • Page 2 (TV, VCR, DVD, etc.), you must program it with the corresponding code entry from the Code Lists. If your TV, VCR, DVD, or satellite receiver is an RCA, PROSCAN or GE brand, the RCU1010 may not need any programming to control them. To program the codes for your components, you can use one of three methods: Code List Entry, Code Search or Code Autosearch.
  • Page 3 3/19/03 16:41 Page 4 Program the Remote Control Using Code List Entry (continued) 5. Before the code can be tested on the chosen component, return to normal operation by pressing the LCD EXIT key and then the LCD OK key on the Exit Setup Screen.
  • Page 4 RCU1010_US_QS_revA 3/19/03 16:41 Page 6 Clear All Stored Learned Commands Under a Mode Clearing all stored Learned commands under a specific mode allows you to continuously update your remote with the latest commands. To clear all Learned commands under one mode (e.g., TV, VCR, DVD, etc.), follow these steps: 1.
  • Page 5: Delete A Smartmacro

    RCU1010_US_QS_revA 3/19/03 16:41 Page 8 Delete a SmartMacro To delete a SmartMacro that has previously been programmed, follow these steps: 1. Press and hold the SETUP key until the touchscreen shows the Code Setup Mode? Screen. Release the SETUP key. 2.

This manual is also suitable for:

Rcu1010