TVs, VCRs, DBS Systems, DVD Players, Laser Disc Players and Audio/Video Receivers. NOTE: For users of RCA, GE and ProScan DBS products, older DBS models require the INFO or MENU keys on this remote be used to make programming selections. Use the SELECT key for making program selections on newer RCA, GE and ProScan DBS models.
ON•OFF The ON•OFF key operates the same as your original remote. : Some RCA, GE and ProScan models require you to press the device key to turn the device on and the POWER key to turn the device off. TV, VCR1, VCR2, DVD, AUX, AUD, CBL & SAT The TV, VCR1, VCR2, DVD, AUX, AUD, CBL and SAT keys are used to select the device you want to control.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 5 Button Description For Audio Operation The AUDIO keys will only function when the remote is enabled into the AUDIO mode. Simply push the AUD key to enable all audio functions. CENTER, FRONT, REAR & TEST Adjust the levels of the center, front and rear speakers respectively used with LEVEL + / LEVEL -.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 6 Getting Into Programming Mode ENTERING PROGRAM MODE 1. Press and hold the CODE SEARCH key for at least 3 seconds until a CODE SET display message is seen on the LCD display window. 2. One menu message will be shown one at a time, for Menu 1 through 13.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 7 Programming Your Device With Manual Code Search When using this programming method, the code library starting on page 9 is not required. The remote control will automatically use the code library stored in your RCU810 remote control. 1.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 8 Programming Your Device With Auto Code Search When using this programming method, the code library starting on page 9 is not required. The remote control will automatically use the code library stored in your RCU810 remote control. 1.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 9 Programming For AUX Key Code Set You can assign any one of the following devices to the AUX key: Audio Components (CD Player, Amplifier, Receiver, Tape Decks, Phono, LD Player), Home, Misc, DVD Player or a second TV, VCR, DBS Satellite System or Cable Box. Device Page TV .
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 15 Learning A Key Sequence The Learning feature is used as a supplement to the standard preprogrammed library. The standard code library provides most of the functions needed, but you can add a small number of additional functions of your choice. 1.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 16 Deleting A Learned Key Sequence To delete a learned key sequence, either overwrite it with a new key, or use the procedure below. 1. Press and hold the CODE SEARCH key until the remote window displays CODE SET.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 17 Setting-Up The Volume Lock This programming mode will lock the volume with devices that have volume control. This function is different from the MUTE key function. With this programming feature the volume of your device will be locked at desired level. You may need to experiment with your system since manufacturers products do not all work the same way.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 18 Setting-Up A Macro Key Sequence MACRO is a command, which defines a sequence of several operations. Each MACRO key has one command sequence programmed so you can make as many as 15 keystrokes in a sequence. For Example: When operating one or more devices to power ON/OFF, one macro key enables you to program series of power ON/OFF commands into one key.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 19 Deleting A Macro Key Sequence To delete a Macro key sequence, either overwrite it with a new key on the same key, or use the procedure below. 1. Press and hold the CODE SEARCH key until the remote window displays CODE SET.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 20 Mode Mapping The Mode Mapping will allow you to custom map one device to another device key. 1. Press and hold the CODE SEARCH key until the remote window displays CODE SET. 2. Step through the programming menu using the UP ( ) key or DOWN ( ) key for MODE MAP, then press the SELECT key.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 21 Setting The Clock Time The Clock Time will function automatically after you program the time, following the directions below. 1. Press and hold the CODE SEARCH key until the remote window displays CODE SET. 2.
RCU810_MANUAL.QXD 1/7/02 11:49 AM Page 22 Operations Reset The Operations Reset clears all custom setup features not related to device code. It is an easy procedure to reset your remote for customized functions like Learning a key sequence or Macro keys. 1.
4. Use the CH+ or CH- keys to move up and down channel presets. OPERATING A HOME THEATRE SURROUND SOUND SYSTEM With RCA receivers, a second press of the TV key should turn the receiver on. 1. Turn the TV on.
The Menu function is used to make changes in the selected settings such as color, channels, timer, etc. The MENU key invokes most major brands like RCA, GE, ProScan, Sony, Magnavox, Philips and Zenith with Menu functions. Each menu mode will vary with brand. You may need to experiment with your system since manufacturers products do not all work the same way.
RCU810_MANUAL.QXD 1/7/02 11:50 AM Page 25 LCD Display Messages The following are the display action messages and description that appears on your LCD screen while you are in programming mode. LCD PROGRAMMING MESSAGES 1. CODE SET: Setup a code. 2. MAN SRCH: Manual code search from the remote code library.
RCU810_MANUAL.QXD 1/7/02 11:50 AM Page 26 Troubleshooting P RO B L E M S O L U T I O N Indicator Icon does not appear when you • Replace the batteries with 4 new AAA press any key or no response after pressing alkaline batteries.
ANT200 Amplified TV Antenna To receive UHF or VHF stations or serve as a backup for cable outages, purchase the RCA Amplified TV Antenna. Switching between your cable or satellite and your anten- na is made easy with an integrated A/B switch. Hooks up to any TV and includes all necessary accessories.
Need help?
Do you have a question about the RCU810 - Learning Universal Remote Control and is the answer not in the manual?
Questions and answers