Operating Your Satellite Receiver ....7 Operating Your VCR ..........8 Operating Your Laserdisc Player......9 Operating Your Audio Equipment....9 Using the Menu Functions for RCA TV’s ..10 Using the Menu Functions for Other TV’s..10 Operating Your TV/VCR Combo Unit..11 Special Operations ..........11 Code Lists TV..............12...
Use these buttons to control playback from a VCR or Laserdisc Player. Also used to record onto a VCR tape. ENTER (Also SKIP for some RCA, GE, and ProScan TV’s) Use this button for two functions. Use as ENTER when programming using CODE SEARCH or when entering channel numbers for some TVs.
3. Replace the cover. Determine if your remote needs programming Some RCA, GE and ProScan devices may already be preprogrammed. 1. Press the button of the device you want to control (for example TV). 2. If the device turns on, press another button to confirm (for example CHANNEL UP).
Programming Your Universal Remote The remote may already be set-up to operate your brand of TV, VCR, Laserdisc, Satellite Receiver, Audio Equipment, or Cable Box. It is preprogrammed with the following codes: TV-000, VCR1-000, AUDIO-003, SAT•Cable Box-000, and Laser Disc Player-037. For brands that require programming, there are two ways to program: Using Code Lists or Code Search.
Programming Your Universal Remote Programming a Device using CODE LISTS 1. Find codes for each device and brand on page numbers shown below. Device Page LaserDisc Player 14 Satellite Receiver 14 PRESS Cable Box & HOLD Audio Equipment 15 2. Press and hold the TV, VCR1, VCR2•LD, SAT•CABLE, or AUDIO button you want to set up.
Operating Your TV Turning the TV On and Off. 1. Press TV to set the remote to control the TV (Most RCA, GE and ProScan models will only turn on when TV is pressed, not POWER.) 2. Press POWER to turn the TV on or off.
Operating Your Cable Box Turning the Cable Box On and Off. 1. Point the remote at the cable box and press SAT•CABLE. 2. Press POWER to turn it on or off. Changing Channels on the Cable Box. Press CHANNEL UP or DOWN to change channels on the cable box or enter the channel as you would normally for your cable box.
Operating Your VCR Turn the VCR On and Off. 1. Press VCR1 or VCR2•LD to set the remote to control the VCR. (Most RCA, GE and ProScan models will only turn on when pressing VCR not POWER). 2. Press POWER to turn the VCR on or off.
Operating Your Audio Equipment Turn the Audio Equipment On and Off. 1. Press AUDIO to set the remote to control the Audio Equipment. (Most RCA, GE and ProScan models will only turn on when pressing AUDIO not POWER). 2. Press POWER to turn the Audio Equipment on or off.
Using the Menu Functions for RCA Televisions RCA, GE, and ProScan televisions use three different menu systems. Read the following descriptions, and choose the one that matches your TV. System 1: If you use MENU, +, and – buttons on your current remote, substitute them with MENU•PROG, and the + and –...
Samsung TV code and the Samsung VCR code. Special Operations RCA, GE and PROSCAN Brand Devices: Many of these devices (TVs and VCRs) will not need to be programmed. In the event that programming is required, the code search method is suggested.
Tatung Admiral Emerson Aiwa Quartz Teac Fisher Memorex designed for home theatre. Akai Funai Quasar Technics See the extensive brand list RCA ∆ Audio Midland Teknika for coverage. Radio Shack/ Toshiba Dynamics Goldstar Minolta Realistic Totevision Bell & Howell Harman...
Need help?
Do you have a question about the RCU500 and is the answer not in the manual?
Questions and answers