Clear All Stored Learned Commands Under A Mode - RCA RCU1010 User Manual

1. Gather all the remotes that you want to learn and have them all
lined up on a flat surface before going into the Learn IR Mode.
2. Place the first original remote in the Learning position (see
Learning Tips section on pg. 14). Point the top of the original
remote at the base of the RCU1010 so the IR LED on the
original remote is in line with the RCU1010 Learn sensor,
located at the bottom of the remote. The remotes should be
positioned 2-3 inches apart.
3. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and the
touchscreen shows the Code Setup Mode? Screen.
4. Release the SETUP key.
5. Press and release the LCD LEARN key. The Learn IR Mode?
Screen is displayed.
6. Press and release the desired component key (TV, VCR,
SAT, AUX, etc.). The Learn IR Key? Screen is displayed.
7. Press and release the LCD key or the rubber key on the
RCU1010 that you wish to use to store the Learned
commands. The Learning Please Wait Screen appears.
Note: You cannot learn any commands under the LCD
LEARN, LCD MACRO, SETUP, BACKLIGHT or any LCD
component keys.
8. Press and hold the original remote key you want to transfer to
the RCU1010 until the Success Screen, followed by the Learn
IR Key? Screen, appears in the display. This process can take
2-3 seconds to complete.
9. Release the original remote key. If there is a problem during
the Learning process, the LCD displays the Learn Error
Screen for three seconds but still remains in the Learning
Setup Mode. If this occurs, try adjusting the distance between
the remotes slightly and repeat from step 7.
10. Repeat steps 7-9 for other keys to be learned.
11. When all the original remote commands have been learned,
press and release the SETUP key. The display shows the
Learning Completed Screen, followed by the Learning IR
Mode? Screen. At this point, you can press and release the
next component key for additional remotes you want the
RCU1010 to learn and repeat steps 6-9.
12. The Learning process is now complete. To exit the Setup
Mode, press and release the LCD EXIT key, followed by the
LCD OK key on the Exit Setup Screen.
If the LCD EXIT key does not respond, press and release
Note:
the SETUP key repeatedly until the Exit Setup Screen appears.

Clear All Stored Learned Commands Under a Mode

If you want to clear all of the Learned commands under one mode (e.g., TV, VCR, DVD, etc.),
follow these steps:
If no commands have been learned, this option is
Note:
not shown in the Setup Mode. Upon deletion of Learned
commands, all previously Learned keys under that
component mode return to their preset code functions.
1. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and
the touchscreen shows the Code Setup Mode? Screen.
2. Release the SETUP key.
3. Press and release the SETUP key repeatedly until the
Delete IR Mode? Screen appears.
15