This Universal Remote Control is already programmed for most RCA, GE and ProScan TVs, VCRs, and DSS Systems. Please Note: For users of RCA, GE and ProScan DSS Products, older DSS Models require that the DISPLAY Button on this remote be used to make program selections. Use the SELECT button for making program selections on newer RCA, GE and ProScan DSS models.
POWER The POWER button operates the same as your original remote (note: some RCA, GE and ProScan models require you to press the device key to turn the device on and the power key to turn the device off).
Sat 1 Manual 6/10/99 11:13 AM Page 5 Button Description PIP and SWAP PREV CH PIP (Picture-in-Picture) and SWAP Controls The PREV CH (Previous Channel) button operate your Television’s Picture-in-Picture operates the same as on your original features. remote. ENTER TV•VCR The ENTER button operates the same as on The TV•VCR button operates the TV•VCR...
11:13 AM Page 6 Programming Your Universal Remote For TV Most RCA, GE and ProScan TVs will not require programming. Check to see if your TV responds to the remote before you begin programming. To Program Your Remote for your TV:...
11:13 AM Page 8 Programming Your Universal Remote For VCR Most RCA, GE and ProScan VCRs will not require programming. Check to see if your VCR responds to the remote before you begin programming. To Program Your Remote for your VCR: INDICATOR 1.
Page 10 Programming Your Universal Remote For Satellite Most RCA, GE and ProScan Satellite systems will not require programming. Check to see if your Satellite Receiver responds to the remote before you begin programming. To Program Your Remote for your Satellite System: INDICATOR 1.
Sat 1 Manual 6/10/99 11:13 AM Page 12 Assigning The AUX Button You can assign any one of the following devices to the AUX button: Audio Components (CD Player, Amplifier, Receiver, Tape Deck, Phonograph), Laser Disc Player or a second TV, VCR, Satellite or Cable Box. 1.
Sat 1 Manual 6/10/99 11:14 AM Page 14 Programming With Code Search If your TV, VCR, Satellite Receiver, Cable Box or Audio System does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.
As a safety feature on your remote, you must press the REC button twice. Channel up and down do not function on an Due to some designs, only the original RCA TV remote will perform these functions. Problems changing channels If your original remote required ENTER after a channel, press ENTER after you select a channel.
Sat 1 Manual 6/10/99 11:14 AM Page 21 Warranty Thomson Consumer Electronics, Inc. warrants that for 90 days from the date of purchase this product is free from defects in material and workmanship. If the item is defective within that period, return it at your expense to the dealer from whom it was purchased together with proof of purchase for replacement.
Page 22
Sat 1 Manual 6/10/99 11:14 AM Page 22 Inside Card...
Page 23
Sat 1 Manual 6/10/99 11:14 AM Page 23 Inside Card...
Page 24
What suggestions do you have to improve this product? _________________________________________________________ _________________________________________________________ _________________________________________________________ Thank you for filling out this card. This information will help us better serve you and others who purchase RCA Consumer Electronics Products. We will not share your information with any other companies. Inside Card...
Need help?
Do you have a question about the SystemLink 4 and is the answer not in the manual?
Questions and answers