Disassembly Procedure - Mitsubishi Electric Mr.Slim PEAD-RP35JALQ Service Manual

10

DISASSEMBLY PROCEDURE

1. Control box
1. Removing the control box cover
(1) Remove the two fixing screws on the cover (A)
to remove it.
2. Thermistor (Intake air)
1. Remove the control box cover according to the
procedure in section [1].
(1) Pull out the thermistor holder (B) and thermis-
tor (C) on the control box.
Exercise caution when removing heavy parts.
(A)
Fig. 1
Fig. 2
(B),(C)
Fig. 3
40