WMF 800 User Manual page 14

Start-up program
At the end of the start-up program, a brewing test is carried out.
The espresso button flashes.
>
Place an appropriate cup under the All-in-One spout
>
Press the flashing espresso button briefly
The brewing test begins.
The coffee grinder will be filled with coffee beans during the brewing test.
Discard this first cup of coffee. After this, the machine is ready to operate.
Start-up complete
Start-up is now complete. All settings can be changed now, or at a later time.
The following setting options are available:
• Set cup size
• Beverage setting
• Basic settings
• Grinding degree setting
For perfection in your preparation of coffee we have compiled a chapter of "Tips and Tricks".
14
Switching on and off
When switching the machine on and off, an automatic coffee system rinse starts
automatically. This requires that sufficient water be in the tank at all times. Empty the drip
tray regularly, since the rinse water (approx. 120 ml) runs into the drip tray through the
All-in-One spout. You can place a container under the All-in-One spout to catch the rinse
water.
About the timer: Switching on and off
The coffee machine automatically switches itself off at a pre-set time. In this circumstance
also, the machine performs a coffee system rinse directly before switching off.
Empty the drip tray regularly, since the rinse water (approx. 120 ml) runs into the drip tray
through the All-in-One spout. You can place a container under the All-in-One spout to
catch the rinse water.
your selection pls
08:15 25.08.2008
Cancel operation
Care button
Select/confirm
Page forward
Increase value
Page backward
Reduce value
The new values are saved when you exit
the program.
Grinding degree setting
Other settings
see page 33
Tips and tricks
see page 48
Setting automatic switch off time after
last beverage dispensing
Basic settings
see page 31