Fill The Water Tank - WMF 800 User Manual

>
Remove the built-in filter from the front of the water tank
>
Pull up the latch on the cartridge adapter
>
Stick the cartridge adapter on the water outlet from the top
>
Push down the latch on the cartridge adapter
>
Unpack the water filter cartridge and place it on the cartridge adapter
The sieve and water filter sit very securely.
1
4

Fill the water tank

>
Fill the water tank with cold tap water (max. 2.2 litres)
Water can then be added, with the lid in place.
>
Place the lid on the water tank
The lid must be on the tank when it is put in place.
>
Slowly slide the water tank back into the machine
Fill the water tank only with fresh, cold water. Never use hot water, mineral water, milk or
other liquids.
[1]
[2]
[3]
[3]
2
[4]
3
Start-up program
9