WMF 800 User Manual page 56

Messages and Tips
Flow error
(water tank is full)
Cleaning halted
Flow error
EPROM Error
Motor driver error
56
Grinder blocked
No hot water dispensing:
>
Remove water fi lter/dirt trap from tank, try again
The O-ring on the water spout supports is defective or swollen
>
Replace the O-ring
See Page 59
Brewing unit stopped up:
>
Remove brewing unit, clean manually, insert and carry out cleaning
program
Grinding degree too fi ne:
>
Adjust the grinding degree by a quarter rotation
>
Vacuum out the grinder chute
>
Bleed machine: Dispense hot water until a constant stream of water
comes out
>
Press the C button
The cleaning continues.
>
Switch machine on/off
If the error repeats, the malfunction must be corrected by the
WMF Service Center.
>
Switch machine on/off
If the error repeats, the malfunction must be corrected by the
WMF Service Center.
The grinder is blocked by foreign bodies:
>
Switch off the machine, unplug the power cord
>
Vacuum out the bean hopper
>
Turn grinders clockwise with the multitool in order to be able to remove
foreign bodies
>
Switch machine on
>
Start the grinder by pressing the beverage button
>
When the grinder is clear again: Set the grinding degree again
Grinding degree too fi ne:
>
Set grinding degree coarser
Clean the brewing unit
Care > brewing unit
see page 45
Other settings
> Set grinding degree,
see page 33
WMF Service Hotline,
see page 64
Grinding degree setting
> Other settings
see page 33