Canon, Olympus, Panasonic and Sony Tray Inserts
Applies to Single or Dual Tray.
Non-Ikelite housings are mounted to the tray with a single bolt. To keep the
camera housing from rotating on the tray, a Tray Insert must be installed.
Note that there are 3 Tray Inserts included with the AF35. Select the Tray
Insert for the corresponding camera housing being installed. Note: See
special Sony instructions, page10.
CANON A
Installation
1. The Tray Insert has an adhesive coating on the side opposite the
lettering. Remove the protective backing to expose the adhesive.
2. Align the Tray Insert with the Tray Recess, the arrows on the Tray Insert
should be pointing toward the holes in the tray.
3. Place Insert into Recess and push down to secure Insert to tray.
OLYMPUS
Tray Insert
Tray Recess
Mounting Holes
B
SONY A
Panasonic
CANON
CANON
Tray Insert
CANON
SONY
Protective
Backing
9