Table of Contents
Advertisement
AF35 Flash Settings
To use the AF35 AutoFlash in the Auto or Manual Mode the camera's built-in
flash must be set to fire on every shot as it is used to trigger the AF35
AutoFlash.
OFF - Figure 1 shows the AF35 flash mode switch set to OFF. Always turn
the flash OFF when not in use for
prolonged periods or when changing
batteries.
AUTO - Figure 2 shows the AF35 flash
Mode Switch set to AUTO. From the
OFF position rotate the Mode Switch
clockwise to access the AUTO exposure
setting; the white indicator on the knob
aligns with AUTO. When taking pictures
with the Mode Switch in the Auto
position, the Auto Sensor automatically
controls the flash output of the AF35
flash.
See Auto Exposure Selector Dial, page
6, for setup and additional information
when using the AF35 in the AUTO
mode.
MANUAL - Figure 3 shows the Mode Switch in the manual exposure mode
with the AF35 turned to the F (full power) position. Rotate the Mode Switch
clockwise to access the different power settings. Each power setting
clockwise from F reduces the light output of the AF35 in one-half f-stop
increments. When shooting in manual mode, it is suggested that you start at
F (full power). If the subject in the photo is underexposed (too dark) you
must move closer to the subject
4
AUTO
AUTO
.
AUTO
AUTO
Advertisement
Table of Contents
