Table of Contents
Advertisement
Mounting Ikelite Housings to the Tray
Applies to Single or Dual Tray.
NOTE: The AF35 AutoFlash can ONLY be mounted to Ikelite Compact
Digital housing models DC-100 and DC-200.
Turn the housing so the tray mounting inserts on the bottom of the housing
are facing up. Place the tray across the bottom of the housing and align the
two outer holes in the tray with the mounting inserts in the bottom of the
housing. Insert the two mounting bolts as shown below and tighten the bolts
firmly to secure the tray to the housing.
Note: Your mounting hardware includes 2 12-24 thread and 2 1/4-20 thread
size screws. Make sure you use the correct thread size screws with your
housing. Do Not cross-thread the Mounting Inserts.
Mounting Bolts
Single Tray
Mounting Insert
Ikelite DC-100 UltraCompact Housing
8
Advertisement
Table of Contents
