Table of Contents
Advertisement
Troubleshooting
Problem
Strobe will not Fire
Flex Arm NOTE:
Your AF35 Flex Arm utilizes a pop-bead system which allows easy
repositioning of the strobe while underwater. After extended use, the
pop-beads will loosen slightly and may no longer hold the strobe in a fixed
postion above water. This should not be a problem underwater.
Pro-V8 LED Lite
The Pro-V8 LED Lite is an easy and affordable way to add light for shooting
video and night diving. See website for details and mounting options:
www.ikelite.com/web-pages/3prov8.html
18
Solution
- Check the AF35 ready light. Turn the flash mode
switch to OFF and then back to Auto. Make sure
the switch has actually clicked into position.
- Check that the batteries are inserted according to
the "+" and "-" markings. Note: it is possible to buy
bad "new" batteries; check the voltage output with
a meter. If using rechargeable batteries make sure
the charger is working properly and that the
batteries are fully charged.
- Check that the camera's built-in flash is turned on
and is set to fire on every shot.
Advertisement
Table of Contents
