Table of Contents
Advertisement
Mounting Canon, Olympus, Panasonic & Sony Housings
to the Tray
Applies to Single or Dual Tray.
After the proper Tray Insert is installed, the housing can be mounted to the
AF35 tray. Turn the housing so the Tripod Mount on the bottom of the
housing is facing up. Place the tray across the bottom of the housing. Align
the center hole in the tray with the hole in the Tripod Mount on the bottom of
the housing. Insert the mounting bolt with lock washer as shown below and
tighten the bolt firmly to secure the tray to the housing. Check that the
Tripod Mount aligns correctly with the Tray Insert restricting the housing
from rotating on the tray.
Mounting Bolt
Single Tray
Lock Washer
Tripod Mount
Tray Insert
Canon, Olympus, Panasonic, or Sony Housing
11
Advertisement
Table of Contents
