Table of Contents
Advertisement
Flex Arm
The AF35 Flex Arm is quite versatile, it allows the flash head to be placed in
many different positions for optimal lighting. The flash head is connected to
the sensor with a sync cord that runs through the center of the flex arm. If
the flex arm is bent too far it may separate from the top bead on the sensor
body. The flex arm and flash will still be connected to the sensor and handle
by the sync cord, DO NOT put undue force on the sync cord. If the Flex Arm
separates from the top of the sensor, position the bottom bead of the Flex
Arm over the bead on the top of the sensor body and push down to reinstall,
Figure 1. The flex arm should snap back into position, Figure 2.
Align arm pop-beads
and push down on
sensor base to rejoin
Figure 1
Figure 2
15
Advertisement
Table of Contents
