⑤
Then, register the ID of the said residence,
and press "
" button to hear a sound of completion.
⑥
The registration is complete when you hang up the handset.
(Repeat this process for other residentes)
⑦
Set the ID' as "1" on the Multi-Entry panel after completing the registration
8. Chime sound
Chime will sound when calling an individual door bell with audio type.
9. Changing and initialization of the password
Note) The doors do not open by default password "1234" .
Only after changing default Password, can you use this function
1) Initialization for the password
(only the password for the Master unit is initialized)
Shut off master unit and turn it on again while holding the "extension call" button
①
and "Door release" button at the same time for 3 seconds at the same time.
The password will initialize to "1234" when the blink of LED stops.
②
Note : Default password : 1234
2) Changing Resident Password(From Multi Entry Panel)
Hold "Residence Number" and "
①
and release when LCD stops blinking.
Enter "Current password" .
②
Hold "
" button for 2 seconds and release when LCD stops blinking.
③
Enter " New Password" with 4 digits on Multi Entry Panel
④
displaying "NEW PW : " message.
Hold "
" button for 2 seconds and release when LCD stops blinking.
⑤
Repeat "New password" to confirm it.
⑥
Hold "
" button for 2 seconds and release when LCD stops blinking.
⑦
8
" button for 2 seconds
10. Opening the entrance of a Multi-entry Panel
With Password
Note) The doors do not open by default password "1234" .
Only after changing default Password, can you use this function
1) Open the entrance with resident password
Press resident number" and "
①
Press PIN number and the "
②
- The door opens with the "OPEN" message display on the LCD screen.
2) Open the entrance with Building password
Enter "9900" and "
" button
①
Enter the "Building password" and the "
②
" button
" button
" button
9
Need help?
Do you have a question about the APV-4PM and is the answer not in the manual?
Questions and answers