Items Relating To Digital Processing (Nos. 902 To - Sony SRW-5000 Operation Manual

Hd digital videocassette recorder format converter board digital betacam processor board rgb processor board
Hide thumbs Also See for SRW-5000:
Table of Contents

Advertisement

Menu List

Items Relating to Digital Processing (Nos. 902 to ...)

Item number
Item
902
FREEZE MODE
903
FREEZE
CONTROL FROM
KEY PANEL
905
STOP FREEZE
CONTROL
910
ACTIVE LINE 1035
CONVERT MODE
A-44
Appendix
Setting
Function
[field]
Specifies the freeze (still-picture) mode and freeze timing
field1
during manual freezing (by REMOTE1-IN (9P) or REMOTE2
field2
PARALELL I/O (50P) connector or on the control panel) or
frame1+2
automatic freezing.
frame2+1
field: Freezes the odd or even field, depending on the timing
field1: Freezes the first (odd) field
field2: Freezes the second (even) field
frame1+2: Freezes the first and the subsequent second field
frame2+1: Freezes the second field and the subsequent first
In the case of freezing in playback modes other than normal
playback, the picture is frozen in frame mode only when
dynamic tracking is performing a frame operation. The
picture is frozed in field mode when dynamic tracking is not
operating.
The frozen picture does not change even if you change this
setting during freeze mode. The change to this setting
becomes effective the next time the VTR outputs a still
picture.
When the stop freeze function is enabled, regardless of the
setting of this item, the picture is frozen in frame mode only
when dynamic tracking is performing a frame operation, or is
frozen in field mode when dynamic tracking is performing a
field operation or when it is not operating.
[momentary]
Determines the freeze operation control by button
latch
operations.
momentary: The picture is frozen only while the button is
latch: The picture is frozen when the button is pressed, and
Button operations
Freezing in odd or even (first or second) field is specified
by item 902. Distinction between the first or second field,
follows the distinction in the reference signal.
disable
Enable or disables the stop freeze function.
[enable]
Selects the conversion mode of the effective scanning line
1080k1035(CONV)
number.
1080k1035(CROP)
1080k1035(CONV): Convert the effective scanning line
1080k1035(CROP): Convert the effective scanning line
in freeze mode.
field
held down.
remains frozen when the button is released.
The fozen picture is cancelled when the button is
pressed again.
number from 1080 to 1035 preserving the aspect ratio of
the image.
number from1080 to 1035. The four sides of the image
are cropped, then it is horizontally expanded.
(Continued)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srw-5500Hksr-5001Hksr-5002Hksr-5003

Table of Contents