Sony SRW-5000 Operation Manual page 104

4-6 AUDIO Menu
4-6-1 Selecting the Audio Input
Signal (AUDIO IN)
To select the audio input signal for CH1 to CH12, use
the following procedure.
CH1 to CH12 can be selected for HDCAM-SR, and
CH1 to CH4 can be selected for HDCAM.
1
Press the [F1] (AUDIO IN) button.
The AUDIO INPUT menu appears, together with
an audio input selection window.
A - I N
C H 1
A E S / E B
A U D I O I N P U T S E L E C T
A - I N
C H 2
C H 1 C H 2
A E S / E B
A / E A / E
A - I N
C H 3
S D I C H 7 C H 8
A - I N
S D I S D I
C H 4
S D I
A - I N A - I N A - I N
C H 5 C H 6 C H 7
S D I S D I S D I
2
Select the audio input signal for each channel.
SDI: audio signal input from the HD SDI INPUT
A/B connector
AES/EBU: audio signal input from the DIGITAL
I/O (AES/EBU) INPUT connector
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making settings for individual channels with
the F buttons
By pressing any of the [F1] (A-IN CH1) to [F8] (A-IN
CH8) buttons in the AUDIO INPUT menu, and in the
ALT+AUDIO screen obtained by pressing the ALT
button, the [F1] (A-IN CH9) to [F4] (A-IN CH12)
buttons, you can select the type of input signal for each
channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2
Press the cursor R or r button, to select the signal.
4-64
Chapter 4 Menu Settings
C H 3 C H 4 C H 5 C H 6
S D I S D I S D I S D I
C H 9 C H 1 0 C H 1 1 C H 1 2
S D I S D I S D I S D I
A - I N A - I N E X I T
C H 8 A L L
S D I . . . . .
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
To select the same input signal
simultaneously on all twelve channels
Press the [F9] (A-IN ALL) button to change the input
signal simultaneously on all twelve channels.
You can also make this setting using the VTR SETUP
menu item 830 "AUDIO INPUT SELECT".
4-6-2 Digital Audio Output
Signal Source Track Selection
(DIGOUT EXCHNG)
To make the source track selection for the digital audio
output signal (audio multiplexed with HDSDI and
SDSDI (1 to 8 channels), and AES/EBU audio output
are targeted) on each of channels 1 to 12, use the
following procedure.
Note that when [F9] (SD OUT EXCHNG) in the
SDOUT menu is set to "ena", SDSDI source track
selection follows the settings of the SDOUT menu.
1
Press the [F3] (DIGOUT EXCHNG) button.
The DIGOUT menu appears, together with a
source track selection window for the digital audio
output signals.
D I G O U T
C H 1
T R 1
A U D I O O U T P U T E X C H A N G E
D I G O U T
C H 2
C H 1 C H 2
T R 2
T R 1 T R 2
D I G O U T
C H 3
T R 3 C H 7 C H 8
D I G O U T
T R 7 T R 8
C H 4
T R 4
D I G O U T D I G O U T D I G O U T
C H 5 C H 6 C H 7
T R 5 T R 6 T R 7
2
Carry out the source track selection for the digital
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
C H 3 C H 4 C H 5 C H 6
T R 3 T R 4 T R 5 T R 6
C H 9 C H 1 0 C H 1 1 C H 1 2
T R 9 T R 1 0 T R 1 1 T R 1 2
D I G O U T E X I T
C H 8
T R 8