Lower Control Panel - Sony SRW-5000 Operation Manual

2-1 Control Panel

2-1-2 Lower Control Panel

1 Menu Control Section
9 DISPLAY button
0 FULL/FINE button
qa PB LEVEL button
qs REC LEVEL button
8 DIAG button
1 MONITOR R buttons
Select the audio signal output from the MONITOR
OUTPUT R connector. This assigns the desired
channel to the MONITOR OUTPUT R connector. If
you assign more than one channel to the same monitor
output connector, a mixed audio signal is output.
You can also make this setting using the VTR SETUP
menu item 808 "AUDIO MONITOR-R select".
In the audio playback level adjustment mode, this is
used to select the channel to be adjusted.
2-4
Chapter 2 Locations and Functions of Parts
1 MONITOR R buttons
2 MONITOR L buttons
CH1 CH2 CH3 CH4 CH5 CH6 CH7
OVER OVER OVER OVER OVER OVER OVER
dB dB dB dB dB dB dB
0 0 0 0 0 0 0
-10 -10 -10 -10 -10 -10 -10
-20 -20 -20 -20 -20 -20 -20
-30 -30 -30 -30 -30 -30 -30
-40 -40 -40 -40 -40 -40 -40
L R L R L R L R L R L R L R
CH1 CH2 CH3 CH4 CH5 CH6 CH7
EDIT PRESET
F1
F2
F3
F4
DIAG
ALT F5 F6 F7 F8 F9
6 Function buttons
7 ALT button
2 MONITOR L buttons
Select the audio signal output from the MONITOR
OUTPUT L connector. This assigns the desired
channel to the MONITOR OUTPUT L connector. If
you assign more than one channel to the same monitor
output connector, a mixed audio signal is output.
You can also make this setting using the VTR SETUP
menu item 807 "AUDIO MONITOR-L select".
In the audio playback level adjustment mode, this is
used to select the channel to be adjusted.
3 MULTI CONTROL knob
Used to set the audio recording/playback level and
make settings in the SET UP menu (see page 4-67).
3 MULTI CONTROL knob
MULTI
L
CONTROL
CH8 CH9 CH10 CH11 CH12 MONITOR
R
HOME
OVER OVER OVER OVER OVER
dB dB dB dB dB
0 0 0 0 0
-10 -10 -10 -10 -10
-20 -20 -20 -20 -20
TC
-30 -30 -30 -30 -30
-40 -40 -40 -40 -40
L R L R L R L R L R
CH8 CH9 CH10 CH11 CH12
VIDEO
VIDEO TC
AUDIO
CUE
PF1
PF2
F10
SET UP
4 Menu selection buttons
5 Color display