Sony SRW-5000 Operation Manual page 163

Menu List
Item number Item
129 STOP CODE
FUNCTION
Sub items
DETECT BEEP
DETECT STOP
STOP ADJUST
REC ADJUST
S-LCD DIMMER
130
131 CHANGED MENU
HIGHLIGHT
Sub items
ITEM SETTING
DEFAULT
SETTING
132 KNOB MODE
A-22
Appendix
Setting Function
Stop code detection mode and adjustment of stop position
when a stop code is detected.
on on: When a stop code is detected, sound a beeper.
[off] off: When a stop code is detected, do not sound a beeper.
on on: When a stop code is detected, stop the tape. ("D-STOP"
[off]
off: When a stop code is detected, do not stop the tape.
150 fr When a stop code is detected, adjust the tape stop position
from the normal stop position in the direction of the SOM
[0 fr]
point (program start point), in the range 0 to 150 frames.
5sec Specifies how many seconds before the SOM point to start
recording a stop code.
4sec
[3sec]
2sec
1sec
16 to [11] to 0
Adjusts the information display luminance.
Changes the display color of items whose setting has been
changed.
[off] off: Changed menu setting values do not change display
on
on: Changed menu setting values are displayed in yellow.
[off] off: Menu numbers with changed DEFAULT values do not
on
on: Menu numbers with changed DEFAULT values are
[set default] Selects the behavior of the unit when the MULTI CONTROL
knob is pressed during VTR SETUP menu operations.
move window
set default: When a setting value is being selected, selects
move window: Move between the item window and the
appears in the information display.)
color.
change display color.
displayed in yellow.
the default value.
window for changing values.