Digital Audio Output Signal Source Track Selection (Sdout Exchng) - Sony SRW-5000 Operation Manual

Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (DIGOUT CH1 TR1) to
[F8] (DIGOUT CH8 TR8) buttons menu, and in the
ALT+DIG OUT screen obtained by pressing the ALT
button, the [F1](DIGOUT CH9) to [F4] (DIGOUT
CH12) buttons, you can select the source track for each
channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2
Press the cursor R or r button, to select the source
track to be output.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
You can also make this setting using VTR SETUP
menu item 834 "DIGITAL AUDIO OUTPUT
EXCHANGE".
4-6-3 Analog Audio Output
Signal Source Track Selection
(ANAOUT EXCHNG)
To make the source track selection for the analog
audio output signal on each of CH1 to CH4, use the
following procedure.
1
Press the [F4] (ANAOUT EXCHNG) button.
The ANAOUT menu appears, together with a
source track selection window for the analog audio
output signals.
A N A O U T
C H 1
T R 1
A N A L O G A U D I O O U T P U T E X C H A N G E
A N A O U T
C H 2
T R 2
A N A O U T
C H 1
C H 3
T R 1
T R 3
A N A O U T
C H 4
T R 4
C H 2 C H 3 C H 4
T R 2 T R 3 T R 4
E X I T
2
Carry out the source track selection for the analog
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (ANAOUT CH1 TR1) to
[F4] (ANAOUT CH4 TR4) buttons, you can select the
source track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2
Press the cursor R or r button, to select the r<Urce
track to be output.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
You can also make this setting using VTR SETUP
menu item 835 "ANALOG AUDIO OUTPUT
EXCHANGE".
4-6-4 Digital Audio Output
Signal Source Track Selection
(SDOUT EXCHNG)
To make the source track selection for the digital audio
output signal (audio multiplexed with SDSDI), use the
following procedure.
1
Press the [F5] (SDOUT EXCHNG) button.
The SDOUT menu appears, together with a source
track selection menu for the digital audio output
signals.
(Continued)
4-65
Chapter 4 Menu Settings