Sony SRW-5000 Operation Manual page 36

3-2 Reference Signals
For playback
Reference signal
REF. INPUT 1
75Ω termination switch: ON
Note
The following signals can be used as a reference
signal.
• HD trilevel SYNC signal of an appropriate field
frequency for external synchronization
• Black burst signal of 525/59.94 Hz
• Black burst signal of 625/50 Hz
Input the signal of the appropriate field frequency for
your system.
Sync signals in 720p mode
Synchronize to an external sync signal when you want
to record or play back 720p signals on this unit
(including editing).
On 720/59.94P systems, you can select the following
reference signals from menu item 006 "EXTERNAL
REFERENCE select".
extrn HD: 1080/59.94i tri-level SYNC signal
extrn SD: 525 black burst signal
When you have directly connected the input and
output connectors of two SRW-5000/5500 units, you
can also perform dubbing with the VTR SETUP menu
item 005 being set to "input".
3-6
Chapter 3 Setting Up the VTR
HD SDI OUTPUT
1/2/3 MONITOR
a)
SRW-5000/5500
HD serial input
monitor
a) The figure shows the SRW-5500.