Items Related To Digital Processing (901 - Sony HDW-F500 Operation Manual

Items Related to Digital Processing (901~)

The values enclosed in a box are the factory settings.
Item number Item
902 FREEZE MODE
903 FREEZE
CONTROL FROM
KEY PANEL
Settable range
Function
Specifies the freeze (still-picture) mode and freeze timing
field1 during manual freezing (by REMOTE1 (9P) or REMOTE2
field2 (50P) connector on the control panel) or automatic freezing.
frame1+2
field: Freezes the odd or even field, depending on the timing
frame2+1
field1: Freezes the first (odd) field
field2: Freezes the second (even) field
frame1+2: Freezes the first and the subsequent second field
frame2+1: Freezes the second field and the subsequent first
field
In the case of freezing in playback modes other than normal
playback, the picture is frozen in frame mode only when
dynamic tracking is performing a frame operation. The
picture is frozed in field mode when dynamic tracking is not
operating.
The frozed picture does not change even if you change this
setting during freeze mode. The change to this setting
becomes effective the next time the VTR outputs a still
picture.
When the stop freeze function is enabled, regardless of the
setting of this item, the picture is frozen in frame mode only
when dynamic tracking is performing a frame operation, or is
frozed in field mode when dynamic tracking is performing a
field operation or when it is not operating.
Determines the freeze operation control by button
latch operations.
momentary : The picture is frozen only while the button is
latch : The picture is frozen when the button is pressed, and
Button operations
• Freezing in odd or even (first or second) field is specified
by item 902. Distinction between the first or second field,
follows the distinction in the reference signal.
in freeze mode.
held down
remains frozen when the button is released.
The fozen picture is cancelled when the button is
pressed again.
A-61
Appendix