Chara Super/H-Pos/V-Pos); Superimposition Of Character Information (Pd Chara Chara Super/H-Pos/V-Pos) - Sony SRW-5000 Operation Manual

4-3 TC Menu
4-3-11 Superimposition of
Character Information (PD
CHARA/CHARA SUPER/H-POS/
V-POS)
To superimpose the characters representing time code
data and operation mode information on the output
signals, use the ALT/[F4] (PD CHARA) and ALT/[F6]
(CHARA SUPER) buttons.
Button Setting Connector to which the
characters are superimposed
ALT/[F4] on FORMAT CONV. OUT connector (on
two connectors)
ALT/[F6] on • MONITOR connector of HD SDI
OUTPUT
• SD OUT COMPOSITE connector
• MONITOR connector of SD SDI
OUT
Contents of superimposed data
T C R . 2 3 : 5 9 . 4 0
S H U T T L E S T I
Note
The example above shows the factory-set contents of
data.
By changing the setting of the VTR SETUP menu item
626 "DISPLAY INFORMATION select", different
types of information can also be displayed on the
second line.
4-32
Chapter 4 Menu Settings
1 Types of time data
Time data
2 Drop frame mark of the time
code reader
3 Drop frame mark of the time
code generator
4 Field mark of the
VITC data
. 1 8 *
L L
5 Operation mode
1 Types of time data
Symbol Meaning
CTL CTL counter data
TCR LTC reader time code data
UBR LTC reader user bit data
TCR. VITC reader time code data
UBR. VITC reader user bit data
TCG Time code data from the time code generator
UBG User bit data from the time code generator
DUR The duration between any two of the four edit
points (IN, OUT, AUDIO IN, and AUDIO
OUT)
Note
When time data or user bits are not read correctly, a
"*" will be displayed in this block so that the symbols
become "T*R", "U*R", "T*R.", "U*R.", etc.
2 Drop frame mark of the time code reader
" • ": drop frame mode
" : ": non-drop frame mode
3 Drop frame mark of the time code generator
" • ": drop frame mode
" : ": non-drop frame mode
4 Field mark of the VITC data
" ": (blank space) fields 1 and 3
" * ": fields 2 and 4
5 Operation mode
The contents are divided into blocks A and B as shown
below.
Block A: Indicates the operation mode.
Block B: Indicates the tape speed or servo lock
status.
Block C: A x mark here indicates an edit section for
automatic editing.
A B C