Sony SRW-5000 Operation Manual page 73

Display
A block B block
TAPE UNTHREAD
STANDBY OFF
T.RELEASE
STOP
PREROLL
PLAY
PLAY LOCK
PLY-SPD Speed shift from
normal speed (%)
REC
REC LOCK
EDIT
EDIT LOCK
JOG STILL
JOG FWD
JOG REV
SHUTTLE (speed)
VAR (speed)
DMC (speed
D-PREV (speed
DMC EDIT
DMC-SPD (speed)
PREVIEW
AUTO EDIT
REVIEW
a) Initial speed or memorized speed
To display a warning message
T C R . 2 3 : 5 9
O E X T E R N
N
The first 16 characters of the
warning message
Set the VTR SETUP menu item 626 "DISPLAY
INFORMATION select" to any setting other than
"time data only" and set the menu item 627 "CHAR
WARNING DISPLAY at dual line mode" to "on".
The first 16 characters of the warning message flashes
on the second line.
Cassette not inserted
Standby off mode
Tension release mode
Stop mode
Preroll mode
Playback mode (servo unlocked)
Playback mode (servo locked)
Capstan override mode
Record mode (servo unlocked)
Record mode (servo locked)
Edit mode (servo unlocked)
Edit mode (servo locked)
Still-picture jog mode
Forward jog (B is lit)
Reverse jog (b is lit)
Shuttle mode
Variable mode
a) DMC memorize mode
)
DMC edit preview mode
a) )
DMC edit mode
DMC initial speed setting
Preview mode
Auto edit mode
Review mode
: 4 0 : 1 8
*
A L R E F E
Operation mode
For details about the warning messages, see "Warning
Messages" on page A-6.
When there are multiple warning messages, each
message flashes twice before it is replaced by the next
message. When there is no warning message, the
setting of the VTR SETUP menu item 626 "DISPLAY
INFORMATION select" flashes on the second line
instead.
To display remaining time on the tape
Use the VTR SETUP menu item 628 "REMAIN
TIME DISPLAY" to display remaining time on the
tape.
off: Do not display remaining time.
10min: Display remaining time when it is 10
minutes or less.
on: Always display remaining time.
4-33
Chapter 4 Menu Settings