Related Manuals for ACTi ACD-2000Q
Summary of Contents for ACTi ACD-2000Q
- Page 1 4-CH Quad Video Server ACD-2000Q/ACD-2000QT Ver. 090327 Hardware User’s Manual...
-
Page 2: Precautions
PRECAUTIONS Read these instructions All the safety and operating instructions should be read before the product is operated. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. - Page 3 and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
-
Page 4: Table Of Contents
Table of Contents PRECAUTIONS....................0-1 Trademarks ..........................0-1 Liability............................0-1 FCC/CE Regulation ........................0-1 INTRODUCTION..................... 1-1 Package Contents ....................1-1 Features and Benefits..................1-2 Safety Instructions ....................1-4 Physical Description.................... 1-6 Basic Connections ....................1-9 Product Specification..................1-10... -
Page 5: Introduction
INTRODUCTION 1.1 Package Contents ACD-2000Q Warranty Card Software CD Terminal Blocks & Screws Power Adaptor (Option) -
Page 6: Features And Benefits
1.2 Features and Benefits This 4-CH Quad Video Server is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality at reasonable bandwidth through a standard TCP/IP network. That’s because it is Ethernet (LAN and WAN) ready and has the powerful ARM9 SoC and the MPEG-4 compression ASIC inside. - Page 7 and manual recording keep every important image recorded in the local hard disk. Reliable and accurate motion detection with instant warning makes you responsive in every condition. Quick and simple search and playback function lets you easily find the images you want. Software Development Kit Support The video server can be integrated or controlled by user’s application program through the Streaming Library or ActiveX control.
-
Page 8: Safety Instructions
1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. - Page 9 If the video product does not operate normally by following the operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.
-
Page 10: Physical Description
1.4 Physical Description Audio Input / Output The video server supports one audio input and output with earphone jack CAM1, CAM2, CAM3 and CAM4 Analog Video Input of Composite Signal with BNC Connectors. Action LED Indicator The LED will light up after video server has successfully completed the boot process. - Page 11 Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings. Terminal Blocks Pin 1~6 The video server supports two alarm input and two alarm output. DI: Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V Logic Level 0: 0.1~0.6V;...
- Page 12 Dip Switch for Serial Port RS-485 or RS-422 pin define (default is RS-485) RS-232 pin define Ethernet Port The video server connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
-
Page 13: Basic Connections
1.5 Basic Connections Follow the procedures below to connect the video server to the respective apparatuses. Connect an analog video source (e.g. CCD Camera) to the video server’s CAM1 ~ CAM4(BNC connector). Connect the video server’s ethernet port to an Ethernet (RJ45 connectors) Connect a PC to the Ethernet hub (RJ45 connectors) Connect a power adaptor to the video server (terminal block... -
Page 14: Product Specification
1.6 Product Specification 1-10...
Need help?
Do you have a question about the ACD-2000Q and is the answer not in the manual?
Questions and answers