Table of Contents
Advertisement
User Manual of Network Speed Dome
When bitrate type is selected as Variable, 6 levels of video quality are selectable.
Frame Rate:
The frame rate is to describe the frequency at which the video stream is updated
and it is measured by frames per second (fps). A higher frame rate is
advantageous when there is movement in the video stream, as it maintains
image quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~12288Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.
Video Encoding:
The Video Encoding standard can be set to H.264.
I Frame Interval:
Set the I-Frame interval from 2 to 250.
4. Click
6.4.2 Configuring Audio Settings
Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
2. Configure the following settings.
Audio Encoding: G.711ulaw, G.711alaw, MP2L2 and G.726 selectable.
Audio Input: When an intercom is connected to the speed dome, you need to
set this option to LineIn. When a microphone is connected to the speed dome,
you need to set this option to MicIn.
Input Volume: Slid the bar to turn up/down the volume. The value ranges from 0
to 100.
3. Click
© Hikvision
to save the settings.
Figure 6-25 Audio Settings
to save the settings.
57
Advertisement
Table of Contents
