Table of Contents
Advertisement
User Manual of Network Speed Dome
39
IR cut filter in
40
IR cut filter out
41
Call pattern 1
42
Call pattern 2
43
Call pattern 3
44
Call pattern 4
45
One-touch patrol
92
Start to set limit stops
When you calling preset 45 (one-touch patrol), the speed dome patrols from the
preset 1 to 32. Before you enable this function, please set the preset 1 to 32 first.
4.4.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from
3. Click
to enter the adding interface of preset as shown in Figure 4-7.
© Hikvision
100
101
102
103
104
105
106
107
108
Figure 4-6 Special Preset
to enter the patrol settings interface.
Start tilt scan
Start panorama scan
Call patrol 5
Call patrol 6
Call patrol 7
Call patrol 8
Fan On
Fan Off
Fan On By Temperature
Control
.
26
Advertisement
Table of Contents
