Configuring Video Tampering Alarm - HIKVISION DS-2DE4582 User Manual

User Manual of Network Speed Dome
an event occurs.
 Send Email
Send an email with alarm information to a user or users when an event
occurs.
To send the Email when an event occurs, you need to refer to Section 6.3.10
Configuring Email Settings to set the Email parameters.
 Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a
FTP server.
You need a FTP server and set FTP parameters first. Refer to Section 6.3.8
Configuring FTP Settings for setting FTP parameters.
 Trigger Channel
Record a video when an event occurs.
You have to set the recording schedule to realize this function. Please refer
to Section 7.2 Configuring Recording Schedule for settings the recording
schedule.

6.6.2 Configuring Video Tampering Alarm

Purpose:
You can configure the speed dome to trigger the alarm actions when the lens is
covered.
Steps:
1. Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering
© Hikvision
71