HIKVISION DS-2DE4582 User Manual page 26

User Manual of Network Speed Dome
3. Click to finish the setting of the current preset.
4. You can click
You can configure up to 256 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
preset.
For convenient preset selection, refer to the following steps to navigate to the preset
you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call them
but not configure them. For instance, preset 99 is the "Start auto scan". If you call the
preset 99, the speed dome starts auto scan function.
Special
Function
Preset
33 Auto flip
34 Back to initial position
35 Call patrol 1
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
© Hikvision
to delete the preset.
Figure 4-5 Calling a Preset
Table 4-3 Special Presets
Special
Function
Preset
93 Set limit stops manually
94 Remote reboot
96 Stop a scan
97 Start random scan
98 Start frame scan
99 Start auto scan
25
to call the