Table of Contents
Advertisement
User Manual of Network Speed Dome
(5) Click
The time of each period can't be overlapped. Up to 4 periods can be configured for
each day.
3. Set the Alarm Actions for Motion Detection.
Purpose:
You can specify the linkage method when an event occurs. The following
contents are about how to configure the different types of linkage method.
Check the checkbox to select the linkage method. Notify surveillance
center, send email, upload to FTP, trigger channel and trigger alarm output
are selectable.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when
© Hikvision
to save the settings.
Figure 6-41 Arming Time Schedule
Figure 6-42 Linkage Method
70
Advertisement
Table of Contents
