HIKVISION DS-2DE4582 User Manual page 78

User Manual of Network Speed Dome
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min
or 10 min.
 Overwrite: If you enable his function and the HDD is full, the new record files
overwrite the oldest record files automatically.
The Pre-record and Post-record parameters vary depending on the speed dome
model.
4. Click
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:
 If you want to configure the all-day recording, please check the All Day
checkbox.
 If you want to record in different time sections, check the Customize
checkbox. Set the Start Time and End Time.
The time of each segment can't be overlapped. Up to 4 segments can be
configured.
(2) Select a Record Type. The record type can be Normal, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm.
 Normal
If you select Normal, the video will be recorded automatically according to
the time of the schedule.
© Hikvision
to edit the record schedule.
Figure 7-8 Record Schedule
77