Step 3: Copy Firmware File; Step 4: Ethernet Connectivity; Step 5: Launch Tftp Server; Step 6: Change Tftp Server Settings - AMX NXA-WAP250G Operation/Reference Manual

Appendix A: Troubleshooting

Step 3: Copy Firmware file

1. E-mail a copy of the firmware file ZZ-IMG.BIN (Firmware file 1.0.4.6) to the dealer.
2. Copy the file into the C:\TFTP-ROOT directory

Step 4: Ethernet Connectivity

1. Verify the Ethernet port is enabled and connect an Ethernet cable from the laptop to the WAP250G.
2. Highlight My Network Places; Right-click Properties, Highlight TCP/IP Settings and click
Properties.
3. Assign a static IP Address on the same network as the WAP250
4. Click OK.
5. Click OK.
6. Click Start/Run and type CMD.
7. Ping IP Address of the WAP250G to verify connectivity.

Step 5: Launch TFTP Server

1. Start\Run\Program
2. Select Solarwinds Free Tools.
3. Select TFTP Server - the following window launches (FIG. 42):
FIG. 42 SolarWinds.NET TFTP Server dialog
4. The IP Address should reflect the same IP Address of your Ethernet port on your laptop and the
default directory (C:\TFTP-Root) is displayed on the bottom left.

Step 6: Change TFTP Server Settings

1. Select File.
2. Select Configure.
3. Select the Security Tab and change selection to Transmit and Receive Files (FIG. 43).
4. Click OK.
44 NXA-WAP250G 802.11b/g Wireless Access Point