System Configuration
Configuration Options (Cont.)
Menu
Wireless VAP 1, 2 (Wireless VAP 2 is only available when the Operation Mode is set to AP)
Basic
Channel
WEP
WPA-PSK
Network
DHCP Client
DHCP Server/NAT
PPPoE
Time & Log
SNTP
Update
Upgrade via the Web Page
Upgrade via a Remote Server Upgrades system software from a file on an FTP or TFTP server
Information
The Information pages display details on the current configuration and status of the WAP250G,
including associated wireless stations and event log messages (FIG. 17).
FIG. 17
Information page
The items on the Information pages page are for status display only, and are not
configurable.
22
Description
Enables the VAP interface and sets the SSID
Sets the radio channel
Configures WEP security
Configures WPA-PSK security
Enables DHCP client or manually sets an IP address
Enables DHCP server and configures NAT settings
Configures PPPoE settings
Sets the system clock using SNTP
Upgrades system software from a local file
NXA-WAP250G 802.11b/g Wireless Access Point
Page
29
30
31
33
34
35
36
38
39
40