AMX NXA-WAP250G Operation/Reference Manual page 19

FIG. 9 Setup Wizard - Network Setting (PPoE settings)
FIG. 10 Setup Wizard - Network Setting (Static IP settings)
NXA-WAP250G 802.11b/g Wireless Access Point
Static IP — The IP address is assigned manually by the user. This may be required if your
NXA-WAP250G is connected to a home gateway router or other device that does not support
a DHCP server (FIG. 10).
If you select Static IP, enter an appropriate IP address and subnet mask that are compatible
with your existing network.
If a management station exists on another network segment, then you must enter the IP
address for a Default Gateway that can route traffic between these segments.
Initial Configuration
15