Information - System - AMX NXA-WAP250G Operation/Reference Manual

Information - System

The System Information page (FIG. 18) displays basic system configuration settings, as well as the
settings for each wireless interface.
FIG. 18
System Information
The items on this page include:
AP System Configuration: Displays basic system configuration settings:
Wireless Data #1/#2 SSID Configuration: The AP Wireless Configuration table displays the wireless
interface settings listed below.
NXA-WAP250G 802.11b/g Wireless Access Point
System Up Time: Length of time since the WAP250G was powered on.
MAC Address: The physical layer address for the WAP250G's Ethernet port.
IP Address: The IP address configured on the WAP250G.
IP Default Gateway: The IP address of the gateway router between the WAP250G and
management stations that exist on other network segments.
HTTP Server: The status of the web management server.
HTTP Server Port: The TCP port used by the web management server.
Version: The version number of the current WAP250G software.
SSID: The service set identifier for this wireless group.
Channel: The radio channel through which the WAP250G communicates with wireless
clients.
The encryption status: The key size used for data encryption.
Authentication Type: Shows if open system or shared key authentication is used.
System Configuration
23