Diagnosing Access Point Indicators - AMX NXA-WAP250G Operation/Reference Manual
802.11 b/g wireless access point for modero touch panels
Hide thumbs
Also See for NXA-WAP250G:
- Installation manual (2 pages) ,
- Operation/reference manual (60 pages) ,
- Manual (46 pages)
Table of Contents
Advertisement
Installation
Diagnosing Access Point Indicators
Symptom
POWER LED is Off • AC power adapter may be disconnected. Check connections between the access
LAN LED is Off
8
Action
point, the power adapter, and the wall outlet.
• Verify that the access point and attached device are powered on.
• Be sure the cable is plugged into both the access point and corresponding device.
• Verify that the proper cable type is used and its length does not exceed specified
limits.
• Check the cable connections for possible defects. Replace the defective cable if
necessary.
NXA-WAP250G 802.11b/g Wireless Access Point
Hide quick links:
Advertisement
Table of Contents
