System Configuration - AMX NXA-WAP250G Operation/Reference Manual

System Configuration

The NXA-WAP250G's basic settings can be configured using the Setup Wizard, as described in the
previous chapter, "Initial Configuration." However, for some installations, you may need to configure
specific settings that are not available in the Setup Wizard. The Advanced Setup menu provides access to
all the unit's settings for complete control of the WAP250G's features.
To access the Advanced Setup menus, follow these steps:
1. Login to the web interface (see the Logging into the Web Interface section on page 12).
2. When the Home page opens, select Advanced Setup. The Welcome to AMX AP Advanced Setup
page displays (FIG. 16).
FIG. 16
Advanced Setup
The information in this chapter is organized to reflect the structure of the web management screens for
easy reference. However, it is recommended that you first configure a password to control access to the
management interface. For details, see the System Setting - Administration section on page 26.
The Advanced Setup pages include the options in the table below. For details on configuration for each
feature, see the corresponding page number.
Configuration Options
Menu
Information
System
Client
Network
Event Log
System
Administration
Operation
VAP Management
Reboot System
NXA-WAP250G 802.11b/g Wireless Access Point
Description
Displays a summary of WAP250G settings
Displays information on stations associated to the WAP250G
Displays DHCP client, server, NAT, and PPPoE settings
Displays the system message log
Configures the password for management access
Sets the device function
Manages the VAP's traffic and priority
Restarts the system and resets configuration settings to factory
defaults
System Configuration
Page
23
24
25
25
26
27
28
28
21