Cisco 6901 Administration Manual page 69

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Conference
CTI Applications A computer telephony integration (CTI) route
point can designate a virtual device to receive
multiple, simultaneous calls for
application-controlled redirection.
EnergyWise Enables an IP Phone to sleep (power down) and
wake (power up) at predetermined times, to
promote energy savings
Forced Authorization Controls the types of calls that certain users can
Codes (FAC) place.
Group Call Pickup Allows a user to answer a call that is ringing on a
directory number in another group.
(Cisco Unified IP
Phone 6911 only)
Hold Status Enables phones with a shared line to distinguish
between the local and remote lines that placed a
call on hold.
The Line LED lights green for Local Hold and red
for Remote Hold.
Hold/Resume Allows the user to move a connected call from an
active state to a held state by using the Hold button.
The user resumes a held call by pressing the line
button, speaker button, or going off hook.
Note
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Allows a user to talk simultaneously with
•
multiple parties by calling each participant
individually. Conference features include
Conference and Meet Me.
• Allows a non-initiator in a standard (ad hoc)
conference to add participants; also allows any
conference participant to join together two
standard conferences on the same line.
Allows a conference host on the Cisco Unified
•
IP Phone 6901 to remove the last participant
that joined the conference by using the
hookflash feature.
The LED on the line button pulses green
when a local call is on hold and the LED
pulses red when a remote call is on hold.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
The service parameter, Advance Adhoc
Conference, (disabled by default in Cisco
Unified Communications Manager) allows
you to enable these features.
For information on conferences, go to the
"Conference Bridges" chapter in the
Cisco Unified Communications Manager
System Guide.
For more information, go to the
Unified IP Phone" chapter in the Cisco Unified
Communications Manager System Guide.
Note Be sure to inform your users whether
these features are activated.
For more information, go to the
Point Configuration" chapter in the Cisco
Unified Communications Manager
Administration Guide.
For more information, see
EnergyWise on the Cisco Unified IP Phone
6901 and 6911, page 5-12.
For more information, go to the
Codes and Forced Authorization
chapter in the Cisco Unified Communications
Manager Features and Services Guide.
For more information, go to the
chapter in the Cisco Unified Communications
Manager Features and Services Guide.
No configuration is required.
Requires no configuration, unless you want to
use music on hold. See Music-on-Hold in this
table for information.
"Cisco
"CTI Route
Enabling
"Client Matter
Codes"
"Call Pickup"
5-5