Adding Phones With Cisco Unified Communications Manager; Adding Phones Using The Bat Phone Template - Cisco 6901 Administration Manual

Adding Phones to the Cisco Unified Communications Manager Database

Adding Phones with Cisco Unified Communications Manager

You can add phones individually to the Cisco Unified Communications Manager database using
Cisco Unified Communications Manager administration. To do so, you first obtain the MAC address for
each phone.
For information about determining a MAC address, see
Protocols" section on page
After you have collected MAC addresses, in Cisco Unified Communications Manager Administration,
choose Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager,
go to the
Communications Manager System Guide.
Related Topics
•
•
•

Adding Phones Using the BAT Phone Template

The Cisco Unified Communications Manager Bulk Administration Tool (BAT) enables you to perform
batch operations, including registration, on multiple phones. To access BAT, choose Bulk
Administration in Cisco Unified Communications Manager Administration,
To add phones by using BAT only (not in conjunction with TAPS), you must obtain the appropriate MAC
address for each phone.
For information about determining a MAC address, see the
Different Protocols" section on page
For detailed instructions about adding phones using the Bulk Administration menu, refer to the Cisco
Unified Communications Manager Bulk Administration Guide, chapter
To add a phone to the Cisco Unified Communications Manager using the BAT phone template, follow
these steps:
Procedure
Step 1 From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone
Template.
Step 2 Click Add New.
Step 3 Choose a Phone Type and click Next.
Step 4 Enter the details of phone specific parameters like Device Pool, Phone Button Template, Device Security
Profile and so on.
Step 5 Click Save.
Step 6 From Cisco Unified Communications Manager, choose Device > Phone > Add New to add a phone
using an existing BAT phone template.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
2-10
2-11.
"Cisco Unified Communications Manager
Adding Phones with autoregistration, page 2-8
Adding Phones with autoregistration and TAPS, page 2-9
Adding Phones Using the BAT Phone Template, page 2-10
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
"Using Cisco Unified IP Phones with Different
Overview" chapter in the Cisco Unified
"Using Cisco Unified IP Phones with
2-11.
Inserting Phones.
OL-24582-01