Samsung SCO-2080RH User Manual page 29

s.
se

When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you
enter one.

Only English is available in the mode.

If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.
SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize
the output phase of multiple cameras using the power synchronization
function (Line-Lock) without using a synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
➊ Press the Function Setup switch.
➋ You can select a desired phase from 0 to 359 when select 'phase'.

When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type
synchronization.

When the power is DC 12V, the SYNC menu is fi xed to the 'INT' mode.
MOTION DET : This product has a feature that allows you to observe
movement of objects in 8 different areas on the screen, and the words 'MOTION
DETECTED' appear on the screen when movement is detected. You can monitor
activity more effi cient.
➊ When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates
'MOTION DET'.
➋ Set up the mode using the Function
Setup switch.
- SENSITIVITY :
You can select up to 8 MD areas.
When SENSITIVITY number is high, motion detection sensitivity is
increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
MOTION DET
1.SENSITIVITY AREA1
2.AREA MODE
3.SEL POS L-TOP
4.XPOS
5.YPOS
6.FILL SET
7.RETURN
English_29
ON
3
4