Samsung SCO-2080RH User Manual page 26

Setup
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
- BURST MODE : You can turn on or off the
- IR Mode : When IR LED is turned on
in B/W, the objects can be
clearly identifi ed due to the
function that decreases screen
saturation of objects within a
short distance.
TOP/BOTTOM/LEFT/RIGHT : Adjust the range according to the loca-
- IR LEVEL: Select LOW when objects appears within a short distance or select
HIGH when objects appears within a long distance on the screen.
AUTO : The mode is switched to 'Color'
in a normal environment, but
switches to 'B/W' mode when
ambient illumination is low.
To set up the switching time for
AUTO mode, press the Function
Setup switch.
- BURST MODE : You can turn on or
- DURATION : You can select brightness of illumination about changing the
- DWELL TIME : You can select the duration time about changing the day/
Fast
Slow
The day/night switching point of the camera can be adjusted.

When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like selecting 'COLOR' mode
and 'AUTO' mode can not be selected.
26_ Setup
burst signal on B/W mode.
tion of objects.
off the burst signal
on B/W mode.
day/night mode.
night mode.
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
Color B/W
2.5 lux
1 lux
BW MODE SETUP
▶ 1. BURST MODE
2. IR MODE
3. IR LEVEL
4. RETURN
AUTO SETUP
▶ 1.BURST MODE
2.COLOR→B/W
DURATION
DWELL TIME
3.B/W→COLOR
DURATION
DWELL TIME
4.RETURN
B/W Color
5 lux
10 lux
ON
ON
HIGH
ON
FAST
3 SEC
FAST
10 SEC